Application: Sewage sludge, Waste sludge, Live sludge, Active sludge, Organic sludge, Mud, Slurry etc.
Chat Online Free QuotationEmail us （sales@sinoftm.com），we will reply to you within 24 hours
A lot of sludge is left over after the waste water treatment. The moisture content may be not high, but it's so mushy that it's hard to dry. Thermal drying is an intermediate sludge treatment process that consists of evaporating the water in the sludge. It significantly reduces the volume and weight of the sludge so that it is easier to recover. We can dry the sludge to less than 10% moisture content. If you need the whole plant from sewage dewatering to sludge drying, please feel free to contact us. We will give you the best solution!
Inquire Details
Sludge dryer is designed specifically to dispose sludge with high moisture, high viscosity, high water holding capacity and low calorific value etc. The sludge dryer is mainly composed of a rotating body, a material lifting plate, a transmission device, a supporting device and a sealing ring. The new material lifting plate has multiple functions such as guiding, current sharing, and material lifting, which can make the material in the radial section of the dryer. It is evenly distributed across the entire surface, and the material curtain becomes thin, uniform and complete, fully contacting the hot air flow, achieving the purpose of making full use of heat energy.
Get a quoteThe heat source used in the dryer is mainly the combustion products for various combustion products, such
as LPG, HFO, natural gas, coal, electric energy, etc. At the same time, the selection of the heat source
of the dryer also affects the operating cost. Therefore, when selecting the heat source of the dryer, it
is necessary for customers to follow the local conditions, the safety of the heat source, environmental
protection, the quality requirements of the materials .
Note:
Temperature control selection: (Manual Control / Automatic Control)
Generally controlled by fuel quantity, you can choose PLC automatic control or manual control.
Which fuel Simple structure,
large production capacity.
Energy saving,
little equipment running costs.
Fully automatic, easy and
stable operation, low failure rate.
Environmental protection
and energy saving
| Model | Shell rotation speed
（r/min） |
Ball load (t) |
Feeding size (mm) |
Discharging size (mm) |
Capacity (t/h) |
Motor power (kw) |
Total weight (t) |
| Ф900×1800 | 36-38 | 1.5 | <20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.85 |
| Ф900×3000 | 36 | 2.7 | <20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.98 |
| Ф1200×2400 | 36 | 3 | <25 | 0.075-0.6 | 1.5-4.8 | 30 | 13.6 |
| Ф1200×3000 | 36 | 3.5 | <25 | 0.074-0.4 | 1.6-5 | 37 | 14.3 |
| Ф1200×4500 | 32.4 | 5 | <25 | 0.074-0.4 | 1.6-5.8 | 55 | 15.6 |
| Ф1500×3000 | 29.7 | 7.5 | <25 | 0.074-0.4 | 2-5 | 75 | 19.5 |
| Ф1500×4500 | 27 | 11 | <25 | 0.074-0.4 | 3-6 | 110 | 22 |
| Ф1500×5700 | 28 | 12 | <25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| Ф1830×3000 | 25.4 | 11 | <25 | 0.074-0.4 | 4-10 | 130 | 34.5 |
| Ф1830×4500 | 25.4 | 15 | <25 | 0.074-0.4 | 4.5-12 | 155 | 38 |
| Ф1830×6400 | 24.1 | 21 | <25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| Ф1830×7000 | 24.1 | 23 | <25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| Ф2100×3000 | 23.7 | 15 | <25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
| Ф2100×4500 | 23.7 | 24 | <25 | 0.074-0.4 | 8-43 | 245 | 56 |
| Ф2100×7000 | 23.7 | 26 | <25 | 0.074-0.4 | 12-48 | 280 | 59.5 |
| Ф2200×4500 | 21.5 | 27 | <25 | 0.074-0.4 | 9-45 | 280 | 54.5 |
|
Spec./m
(Dia.×Length) |
Shell Cubage
(m³) |
Capacity
(t/h) |
|
Φ1.2×8.0
|
9.0
|
1.9～2.4
|
|
Φ1.2×10
|
11.3
|
2.4～3.0
|
|
Φ1.5×12
|
21.2
|
4.5～5.7
|
|
Φ1.5×14
|
24.7
|
5.3～6.6
|
|
Φ1.5×15
|
26.5
|
5.7～7.1
|
|
Φ1.8×12
|
30.5
|
6.5～8.1
|
|
Φ1.8×14
|
35.6
|
7.6～9.5
|
|
Φ2.2×12
|
45.6
|
9.7～12.2
|
|
Φ2.2×14
|
53.2
|
11.4～14.2
|
|
Φ2.2×16
|
60.8
|
13.0～16.2
|
|
Φ2.4×14
|
63.3
|
13.5～16.9
|
|
Φ2.4×18
|
81.4
|
17.4～21.7
|
|
Φ2.4×20
|
90.4
|
19.3～24.1
|
|
Φ2.4×22
|
99.5
|
21.2～26.5
|
|
Φ2.6×24
|
127.4
|
27.2～34.0
|
|
Φ3.0×20
|
141.3
|
30.1～37.7
|
|
Φ3.0×25
|
176.6
|
37.7～47.1
|
|
Φ3.2×25
|
201
|
42.9～53.6
|
|
Φ3.6×28
|
285
|
60.8～76.0
|
Technical parameters of indirect heat dryer:
|
Shell diameter ×shell Length Items |
Inside diameter of outer shell (mm) |
Inside diameter of inner shell (mm) |
Shell cubage (m³) |
| Φ1.5×15m | 1500 | 500 | 20.27 |
| Φ1.5×17m | 22.97 | ||
| Φ1.5×19m | 25.68 | ||
| Φ1.8×21m | 1800 | 650 | 35.91 |
| Φ1.8×23m | 39.33 | ||
| Φ1.8×25m | 42.75 | ||
| Φ2.2×21m | 2200 | 800 | 58.10 |
| Φ2.2×23m | 63.61 | ||
| Φ2.2×25m | 69.15 |
Customer's Feedback:
We are very satisfied with your production, feeding the material and welding processes. In the
installation process, Fote's excellent customer service has earned more trust. The production
flow is smooth and there are no failures. The wear-resistance ability is strong and working
efficiency is high.
We guarantee that our products are all up to standards set for mining machinery.
We will deliver products timely by contract.
We will supply you with installation drawings, specifications and operation manual.
We offer lifetime warranty and components for products.
Henan Fote Heavy Machinery Co., Ltd., has been in existence for more than 40 years since its establishment. It has four production bases in China and its products are sold to more than 160 countries around the world, including India, Kenya, Tanzania, Nigeria, Ethiopia, South Africa, Zambia, Uganda, Ghana, Indonesia, Singapore, Australia, etc.
01Contact online/leave a message/send an email to tell your needs.
02Tailor the production plan for you.
03Come to the factory for inspection and test.
04Strict inspection and ship on-time and delivery.
05Installation accompanied by a professional team.
06Regular return visits after-sales for life.
May I help you?
Leave Message
Chat Online