10-2200t/h Capacity:
150×250-1500×1800mm Feed opening:
Jaw crusher is one kind of the best-selling crusher machine for stones and ores. Due to its high performance and competitive price, it is widely used for processing granite, limestone, quarry stones, gravel, basalt, aggregate, gold ore, iron ore, concrete, etc.
With the unique structure and wide throughput range, jaw crusher can be used for primary and fine crushing of over 120 kinds of stones and ores in mining, quarry, construction and other fields.
In the process of breaking huge stones into small stones, the first crusher is usually the ' main ' crusher, and the longest and most solid crusher is the jaw crusher. When feeding the jaw crusher, the material is poured into the crushing chamber containing the jaw teeth from the top inlet. The jaw teeth top the material to the wall with great force and break it into smaller stones.
High-efficiency crushing capacity : The jaw crusher crushes the material through the relative motion of the upper and lower jaw plates, and has a large crushing ratio and high crushing efficiency. It can quickly crush large materials into smaller particles, which is suitable for dealing with rocks, ores and other materials with various hardness and particle size.
01Good adaptability : its discharge port and feed port can be adjusted to control the particle size and yield of crushed materials. At the same time, different types of jaw crusher can also adapt to different production sites and process requirements.
02The structure is simple and reliable : The structure of jaw crusher is relatively simple, which is mainly composed of frame, jaw plate, eccentric shaft, adjustment device and so on. This simple structure makes it easy to maintain and repair, and has high reliability. In addition, the jaw crusher runs smoothly, with low noise and little impact on the environment.
03Wide range of applications : Jaw crusher is widely used in mining, metallurgy, building materials, roads, railways, water conservancy and other fields. It can be used to crush rocks and ores of various hardness, including limestone, granite, basalt, quartz sand, etc. At the same time, the jaw crusher can also be used in the fields of renewable resource recovery and construction waste treatment.
04
Our Jaw Crusher has been exported to over 160 countries, such as, Pakistan, Egypt, Indonesia, Malaysia, Ethiopia, Nigeria, South Africa, etc. Furthermore, we provide 100% factory price and maximum discount for you. Additionally, if you are new in this industry, we will provide professional suggestions and solutions for you.Get Quote
Nearly 40 years of production experience, well welcomed by customers from 90+ countries.
Expert design as your order and requirement, with all-around solutions to your problems.
Reasonable plan for grinding procedure and scientific production to help you to gain more profits.
Regular inspection and return visit, and solve your after-sale problems in time.
| Model | Feeding opening size(mm) | Max.Feeding Size(mm) | Processing Capacity (t/h) |
| PE 150×250 | 150×250 | 125 | 1-3 |
| PE 200×300 | 200×300 | 180 | 2-6 |
| PE 200×350 | 200×350 | 180 | 3-10 |
| PE 250×400 | 250×400 | 210 | 5-21 |
| PE 400×600 | 400×600 | 340 | 16-64 |
| PE 500×750 | 500×750 | 425 | 40-110 |
| PE 600×750 | 600×750 | 500 | 80-240 |
| PE 600×900 | 600×900 | 500 | 70-180 |
| PE 750×1060 | 750×1060 | 630 | 110-320 |
| PE 900×1200 | 900×1200 | 750 | 220-380 |
| PE 1200×1500 | 1200×1500 | 1020 | 400-1000 |
| PE 1500×1800 | 1500×1800 | 1200 | 580-1200 |
| PEX 150×750 | 150×750 | 120 | 8-25 |
| PEX 250×750 | 250×750 | 210 | 13-35 |
| PEX 250×1000 | 250×1000 | 210 | 16-52 |
| PEX 250×1200 | 250×1200 | 210 | 20-61 |
| PEX 300×1300 | 300×1300 | 250 | 16-105 |
| PEX 500×1500 | 500×1500 | 420 | 50-180 |
Note: The motor power in the above table is suitable for 50HZ. When the power supply is 60HZ, the motor poles for PE150×250 and PEX150×750 change to 6 poles.
Note: Processing capacity may vary with different materials and feeding sizes.
| Model | Feeding opening size(mm) | Max.Feeding size（mm） | Capacity (t/h) |
| HD72(57) | 460×720 | 425 | 50-120 |
| HD86(69) | 580×860 | 500 | 60-280 |
| HD98(751) | 680×980 | 630 | 110-410 |
| HD110(912) | 850×1100 | 750 | 170-550 |
| HD125 | 950×1250 | 900 | 280-750 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Feeding opening size(mm) | Maximum Feeding Size(mm) | Processing capacity(t/h) |
| CJ80 | 800×510 | 410 | 55-335 |
| CJ96 | 930×580 | 480 | 105-390 |
| CJ100 | 1000×760 | 600 | 150-420 |
| CJ106 | 1060×700 | 560 | 150-500 |
| CJ116 | 1150×760 | 608 | 165-520 |
| CJ120 | 1200×870 | 700 | 175-610 |
| CJ125 | 1250×950 | 760 | 240-800 |
| CJ130 | 1300×1000 | 800 | 270-831 |
| CJ150 | 1400×1200 | 960 | 340-880 |
| CJ160 | 1600×1200 | 960 | 430-1145 |
| CJ180 | 1800×1200 | 960 | 485-1290 |
| CJ200 | 2000×1500 | 1200 | 630-1435 |
Note: Processing capacity may vary with different materials and feeding sizes.
Henan Fote Heavy Machinery Co., Ltd., has been in existence for more than 40 years since its establishment. It has four production bases in China and its products are sold to more than 160 countries around the world, including South Africa, Tanzania, Nigeria, Botswana, Uganda, United Arab Emirates, Ghana, Sierra Leone, India, Indonesia, Singapore, Australia, Sri Lanka, Vietnam, Bangladesh, etc.
If your machine fails, production at the entire plant will be at risk. To avoid such losses, you can get critical replacement parts of the machine whenever you need it.
Our products support global logistics network distribution, ensuring that FTM brand spare parts or consumables are available when you need it.
Our fixed-model machines and consumables are available from stock to ensure customers get the machines they need in time.
