Email us （sales@sinoftm.com），we will reply to you within 24 hours
Application: coal slurry, coal slime, raw coal, flotation clean coal, mixed clean coal, cleaned coal, lignite, washed coal and other materials in the coal industry.
Chat OnlineFree Quotation
According to the working principle, the coal dryer is a rotary drum dryer. It is a very mature drying equipment produced by mining equipment manufacturers. It is suitable for drying coal slime, clean coal, and coal. Lignite, clean coal, sludge, magnetic, heavy, and float concentrates of metal and non-metallic minerals, and clay in the cement industry. It is characterized by high productivity and easy operation.
The barrel is a horizontal rotary cylinder, and its interior is welded with various copy plates with different angles in a staggered arrangement from front to back.According to the needs of users, the interior of the coal dryer barrel can be designed and equipped with refractory materials for temperature insulation. The material end is equipped with a door ring and a spiral copy plate to prevent the material from being poured.
Inquire Details
The high-efficiency and energy-saving slime dryer is a new type of drying equipment developed on the basis of the drum dryer, which can be widely used in:
The coal is sent to the hopper by a belt conveyor or bucket elevator, and then enters the feeding end through the feeding pipe through the feeding machine of the hopper. The material is added from the higher end, and the heating medium enters from the lower end, and is in countercurrent contact with the material. When the wet material moves forward in the cylinder, it directly or indirectly receives heat from the heating medium, so that the wet material can be dried, and then sent out through a belt or screw conveyor at the discharge end. In addition, dust collectors can also be used to reduce dust in the drying system.
The heat source used in the dryer is mainly the combustion products for various combustion products, such as LPG, HFO, natural gas, coal, electric energy, etc. At the same time, the selection of the heat source of the dryer also affects the operating cost. Therefore, when selecting the heat source of the dryer, it is necessary for customers to follow the local conditions, the safety of the heat source, environmental protection, the quality requirements of the materials . Note: Temperature control selection: (Manual Control / Automatic Control) Generally controlled by fuel quantity, you can choose PLC automatic control or manual control.
High thermal efficiency, stable drying quality.
Long parts life, not easy to wear.
Simple structure, a small footprint.
Uniform vibration, airproof setting.
Exchange heat fully, lower the energy consumption.
Simple operation, environmental protection and energy saving.
| Model | Shell rotation
speed
（r/min） |
Ball load (t) |
Feeding size
(mm) |
Discharging size
(mm) |
Capacity (t/h) |
Motor power (kw) |
Total weight
(t) |
| Ф900×1800 | 36-38 | 1.5 | <20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.85 |
| Ф900×3000 | 36 | 2.7 | <20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.98 |
| Ф1200×2400 | 36 | 3 | <25 | 0.075-0.6 | 1.5-4.8 | 30 | 13.6 |
| Ф1200×3000 | 36 | 3.5 | <25 | 0.074-0.4 | 1.6-5 | 37 | 14.3 |
| Ф1200×4500 | 32.4 | 5 | <25 | 0.074-0.4 | 1.6-5.8 | 55 | 15.6 |
| Ф1500×3000 | 29.7 | 7.5 | <25 | 0.074-0.4 | 2-5 | 75 | 19.5 |
| Ф1500×4500 | 27 | 11 | <25 | 0.074-0.4 | 3-6 | 110 | 22 |
| Ф1500×5700 | 28 | 12 | <25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| Ф1830×3000 | 25.4 | 11 | <25 | 0.074-0.4 | 4-10 | 130 | 34.5 |
| Ф1830×4500 | 25.4 | 15 | <25 | 0.074-0.4 | 4.5-12 | 155 | 38 |
| Ф1830×6400 | 24.1 | 21 | <25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| Ф1830×7000 | 24.1 | 23 | <25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| Ф2100×3000 | 23.7 | 15 | <25 | 0.074-0.4 | 6.5-36 | 155 | 45 |
| Ф2100×4500 | 23.7 | 24 | <25 | 0.074-0.4 | 8-43 | 245 | 56 |
| Ф2100×7000 | 23.7 | 26 | <25 | 0.074-0.4 | 12-48 | 280 | 59.5 |
| Ф2200×4500 | 21.5 | 27 | <25 | 0.074-0.4 | 9-45 | 280 | 54.5 |
|
Spec./m
(Dia.×Length) |
Shell Cubage
(m³) |
Capacity
(t/h) |
|
Φ1.2×8.0
|
9.0
|
1.9～2.4
|
|
Φ1.2×10
|
11.3
|
2.4～3.0
|
|
Φ1.5×12
|
21.2
|
4.5～5.7
|
|
Φ1.5×14
|
24.7
|
5.3～6.6
|
|
Φ1.5×15
|
26.5
|
5.7～7.1
|
|
Φ1.8×12
|
30.5
|
6.5～8.1
|
|
Φ1.8×14
|
35.6
|
7.6～9.5
|
|
Φ2.2×12
|
45.6
|
9.7～12.2
|
|
Φ2.2×14
|
53.2
|
11.4～14.2
|
|
Φ2.2×16
|
60.8
|
13.0～16.2
|
|
Φ2.4×14
|
63.3
|
13.5～16.9
|
|
Φ2.4×18
|
81.4
|
17.4～21.7
|
|
Φ2.4×20
|
90.4
|
19.3～24.1
|
|
Φ2.4×22
|
99.5
|
21.2～26.5
|
|
Φ2.6×24
|
127.4
|
27.2～34.0
|
|
Φ3.0×20
|
141.3
|
30.1～37.7
|
|
Φ3.0×25
|
176.6
|
37.7～47.1
|
|
Φ3.2×25
|
201
|
42.9～53.6
|
|
Φ3.6×28
|
285
|
60.8～76.0
|
Technical parameters of indirect heat dryer:
|
Shell diameter ×shell Length Items |
Inside diameter of outer shell (mm) |
Inside diameter of inner shell (mm) |
Shell cubage (m³) |
| Φ1.5×15m | 1500 | 500 | 20.27 |
| Φ1.5×17m | 22.97 | ||
| Φ1.5×19m | 25.68 | ||
| Φ1.8×21m | 1800 | 650 | 35.91 |
| Φ1.8×23m | 39.33 | ||
| Φ1.8×25m | 42.75 | ||
| Φ2.2×21m | 2200 | 800 | 58.10 |
| Φ2.2×23m | 63.61 | ||
| Φ2.2×25m | 69.15 |
Hot models: Φ2.4×18, Φ2.2×16, Φ1.8×12
Customer's Feedback:
With a friendly technical discussion with our engineers, we are very satisfied with your
production, feeding the material and welding processes, and the company's reputation in the
industry for many years let us make sure that we have found the most suitable supplier.
We guarantee that our products are all up to standards set for mining machinery.
We will deliver products timely by contract.
We will supply you with installation drawings, specifications and operation manual.
We offer lifetime warranty and components for products.
Henan Fote Heavy Machinery Co., Ltd., has been in existence for more than 40 years since its establishment. It has four production bases in China and its products are sold to more than 160 countries around the world, including India, Kenya, Tanzania, Nigeria, Ethiopia, South Africa, Zambia, Uganda, Ghana, Indonesia, Singapore, Australia, etc.
Contact online/leave a message/send an email to tell your needs.
Tailor the production plan for you.
Come to the factory for inspection and test.
Strict inspection and ship on-time and delivery.
Installation accompanied by a professional team.
Regular return visits after-sales for life.
Please feel free to write down your requirement in the form below. We will reply you within 24 hours and we will protect your personal privacy information.
E-mail:
OPEN
Leave Message
Chat Online