Brief of Charcoal Briquette Machine

By: Fote MachineryAugust 12th,2020

Processing Capacity：1-35t/h

Common Shapes: Round, Square, Pillow, Oval.

Applicable materials：charcoal powder, coal powder, carbon powder, coal slurry, coal slag, coke powder, etc

1.Brief In Charcoal Briquette Machine

The charcoal briquette machine is mainly used to compress powdery materials that are difficult to form. It is characterized by high forming pressure, adjustable host speed, and screw feeding device. This machine is widely used in refractory materials, power plants, metallurgy, chemical industry, energy, transportation, heating, industry, agriculture, barbecue and other fields. This machine is suitable for single machine operation and large-scale production line.

2.Charcoal Briquette Machine Structure

The structure of charcoal briquette machine is composed of three parts: feeding part; transmission part; forming part.

2.1 Feeding Part

The feeding part is mainly to achieve quantitative feeding to ensure that the material evenly into the roller. Driven by electromagnetic speed regulating motor, the spiral feeding device rotates through the belt wheel and worm reducer, forcing the material into the feeding port. If the amount of feed is too large, the feeding device’s electricity will be overload ; If the amount of feed is too small, it will not make a ball. Therefore, skillful operation is an important condition to ensure the ball to work normally.

2.2 Transmission Part

The main transmission system are: motor - triangle belt - reducer - open gear - nip roller.

2.3 Forming Part

It mainly refers to the main part, the core part is the nip roller.

3. Operating Principle

3.1 Firstly, the material is fed into the ball mold on the press roller.

3.2 With the rotation of the pressure roller, the pressure of the material is small and large. Under the action of the huge line pressure, the material becomes the finished ball from the powder.

3.3 After the material passes the line, the molding pressure is rapidly reduced, so that the material enters the off-ball state, and the ball is smoothly removed.

4. Advantages

Now FTM®charcoal briquette machine has been widely used in large and medium-sized enterprises all over the world. It saves a lot of resource consumption and economic cost for the enterprise.

1.High density of molded spheres

2. Easy to transport and smelt

3. Increased waste utilization

4. Low Energy consumption and environmental protection